| Brand | OLYMPUS |
|---|---|
| Model | GIF-Q150 |
| Fault | 1.with Image; 2.one Eye Of Light Bundle Broken; 3.insert Tube Little Aging; 4.biopsy Tube Abrasion; 5.bending Section Deformation; 6.wires And Helix Tube Abrasion; 7.light Guide Tube Aging And Wrinkle. |
| Solution | Replace Light Bundle ,insert Tube, Biopsy Tube,bending Section,wires,helix Tube,light Guide Tube And Rubber. |
| Packaging Details | Standard Package |
| Brand | STORZ |
|---|---|
| Model | 13820pks |
| Fault | 1.Rubber Leakage; 2.Wire Abrasion; 3. No Up Angle, Other Angle Lack Of |
| Solution | 1. Replace The Wires, Coil Pipe, Rubber; 2.Adjust Angle |
| Packaging Details | Standard Package |
| Brand | Olympus |
|---|---|
| Model | CF-H190L |
| Fault | 1. Image Ok; 2. Light Bundle Still Ok; 3. The Front End Of The Insert Tube Is Broken, And The Serpentine; The Position Of Stress Boot Is Leaking; 4. Biopsy Tube Wear; 5. Left Angle Failure, Bending Section, Wire And Helix Tube Wear; 6. Soft And Hard |
| Solution | Replace The Insertion Tube, Biopsy Tube, Bending Section, Wire, Helix Tube, Soft And Hard Adjusting Wire And Rubber. (No Warranty For CCD) |
| Packaging Details | Standard Package |
| Brand | Samsung |
|---|---|
| Model | P2-4AH |
| Fault | Lens Problem, Crystal Damage |
| Solution | Replace Probe Lens, Replace Crystal |
| Packaging Details | Standard Package |
| Brand | OLYMPUS |
|---|---|
| Model | TJF-Q180V |
| Fault | 1. Image Ok; 2. Light Bundlestill Ok; 3. Insert Tubestill Ok; 4. Biopsy Tubewear; 5. Bendingsection, Wires And Helix Tube Wear; 6. Knob Leakage. |
| Solution | Suggest Toreplace Biopsy Tube, Bending Section, Wires, Helix Tube, Knob And Rubber. (Nowarranty For CCD) |
| Packaging Details | Standard Package |
| Brand | Olympus |
|---|---|
| Model | CF-240L |
| Fault | Leakage, Glass Of Light Bundle Blur, Rubber Leak, Angle Not Enough,image Fuzzle,objective Lens Scratch, |
| Solution | Replace Rubber, Objective Lens, C Cover. Adjust The Angle. |
| Packaging Details | Standard Package |
| Brand | Karl Storz |
|---|---|
| Model | 27005BA |
| Fault | 1. No Image. 2. Fiber Abrasion. 3. Rod Lens Broken And Cracked. 4. Objective Lens Broken And Dirty. 5. Eyepiece Cover Broken. |
| Solution | 1. Replace Rod Lens. 2. Replace Inner Tube. 3. Replace Outer Tube. 4. Replace Objective Lens Group. 5. Clean The Eyepiece. 6. Replace Fiber. 7. Replace Eyepiece Cover. 8. Clean And Install The Optical Path, Check The Image. 9. Seal With Endoscope A |
| Packaging Details | Standard Package |
| Brand | Toshiba |
|---|---|
| Model | PST-25BT |
| Fault | Housing Break, Image Weak, Crystal Aging |
| Solution | Replace Crystal And Housing |
| Packaging Details | Standard Package |
| Brand | STRYKER |
|---|---|
| Model | 1188-210-105 |
| Fault | Image With Interrupt. Cable Aging |
| Solution | Replace Compatible New Cable And Connector |
| Packaging Details | Standard Package |
| Brand | STORZ |
|---|---|
| Model | H3-ZA |
| Fault | Image Streaks Frequently,cable Loose Contact And Aged |
| Solution | Replace Cable Kit |
| Packaging Details | Standard Package |