| Brand | Olympus |
|---|---|
| Model | CF-H190L |
| Fault | 1. Image Ok; 2. Light Bundle Still Ok; 3. The Front End Of The Insert Tube Is Broken, And The Serpentine; The Position Of Stress Boot Is Leaking; 4. Biopsy Tube Wear; 5. Left Angle Failure, Bending Section, Wire And Helix Tube Wear; 6. Soft And Hard |
| Solution | Replace The Insertion Tube, Biopsy Tube, Bending Section, Wire, Helix Tube, Soft And Hard Adjusting Wire And Rubber. (No Warranty For CCD) |
| Packaging Details | Standard Package |
| Brand | OLYMPUS |
|---|---|
| Model | GIF-Q150 |
| Fault | 1.with Image; 2.one Eye Of Light Bundle Broken; 3.insert Tube Little Aging; 4.biopsy Tube Abrasion; 5.bending Section Deformation; 6.wires And Helix Tube Abrasion; 7.light Guide Tube Aging And Wrinkle. |
| Solution | Replace Light Bundle ,insert Tube, Biopsy Tube,bending Section,wires,helix Tube,light Guide Tube And Rubber. |
| Packaging Details | Standard Package |
| Brand | Olympus |
|---|---|
| Model | LTF-160 |
| Fault | 1.with Image, But Big Risk For CCD After Leakage. 2. Light Bundle Broken Completely. 3. Insert Tube With Little Scratch. 4. Biopsy Tube Abrasion And Leakage. 5. Wires And Helix Tube Abrasion. 6. Grip Broken, Leakage. 7. All The Buttons Failure. 8. R |
| Solution | Replace CCD,light Bundle, Biopsy Tube, Wires,helix Tube,grip And Rubber, Repair All The Buttons. |
| Packaging Details | Standard Package |
| Brand | Olympus |
|---|---|
| Model | GIF-Q180 |
| Fault | 1.image Definition Not Enough, CCD Aging. 2.30% Light Bundle Broken. 3. Insert Tube Aging And Wrinkle. 4.Biopsy Tube Abrasion. 5. Bending Section Bited, Transformation. 6. Angle Not Enough, Wires And Helix Tube Abrasion. 7. Light Guide Tube Aging And |
| Solution | Replace CCD, Light Bundle,insert Tube, Biopsy Tube, Bending Section,helix Tube, Wires, Light Guide Tube, Pins And Rubber. |
| Packaging Details | Standard Package |
| Brand | Olympus |
|---|---|
| Model | GIF-H180J |
| Fault | 1.image With Shadow; 2.light Bundle Broken; 3.insert Tube With Bite Mark; 4.biopsy Tube Abrasion; 5.bending Section Serious Deformation; 6.wires And Helix Tube Abrasion; 7.light Guide Tube Aging And Wrinkle. |
| Solution | Replace CCD, Light Bundle, Insert Tube,biopsy Tube,aire&water Tube,bending Section,wires,helix Tube,light Guide Tube And Rubber. |
| Packaging Details | Standard Package |
| Brand | Olympus |
|---|---|
| Model | GIF-H170 |
| Fault | 1. The Top Left And Middle Right Side With Blur Image, Objective Lens Broken. 2. 20% Light Bundle Broken, The Small Lens Turned Yellow. 3. Insert Tube Yellow And Wrinkles. 4. The Biopsy Tube Abrasion. 5. The Wire And Helix Tube Abrasion. 6. Light Gu |
| Solution | Replace Objective Lens, Light Bundle, Small Lens, Insert Tube, Biopsy Tube, Wires, Helix Tube, Light Guide Tube And Rubber. |
| Packaging Details | Standard Package |
| Brand | Olympus |
|---|---|
| Model | CHF-P20Q |
| Fault | 1.Insert Tube Cracked; 2.Rubber Leakage; 3.Image With Black Point And Cracked; 4.Angulation Tight; 5.Biopsy Tube Aging |
| Solution | Replace Image Bundle; Insert Tube; Biopsy Tube; Bending Mesh And Wires; Coil Pipe; Rubber |
| Packaging Details | Standard Package |
| Brand | Olympus |
|---|---|
| Model | CF-2T160L |
| Fault | 1. With Image. 2. 10% Light Bundle Broken. 3. Insert Tube Is Ok. 4. Biopsy Tube Abrasion. 5. Angle Tied, Bending Section Transformation. 6. Wires, Helix Tube Abrasion, No Up Angle. |
| Solution | Replace Wires, Helix Tube, Bending Section And Rubber. |
| Packaging Details | Standard Package |
| Brand | Olympus |
|---|---|
| Model | BF-XP160F |
| Fault | 1. Image Degumming, Serious Color, CCD Aging, A Few Black And Gray Spots; 2. 20% Of The Light Bundle Is Broken; 3. Insert Tube Aging Slightly; 4. Biopsy Tube Wear, Not Smooth; 5. Bending Section, Steel Wire, Screw Tube Wear; |
| Solution | Replace CCD, Image Beam, Beam, Insert Tube, Pliers Tube, Snake Bone, Steel Wire, Spiral Tube, Rubber. |
| Packaging Details | Standard Package |
| Brand | Olympus |
|---|---|
| Model | ENF-GP |
| Fault | 1. Image With Black Point And Image Bundle Broken 2. Light Bundle Aged 3. Insert Tube Aging And Wrinkle 4. Bending Section Deformation 5. Angle With Not Enough 6. Rubber Abrasion |
| Solution | Replace Image Bundle; Light Bundle; Insert Tube; Wires; Helix Tube; Bending Section; Rubber |
| Packaging Details | Standard Package |